3M™ 6000 Series Half Mask Respirator
This half mask respirator made from synthetic rubber uses replaceable cartridges and filters. Designed for respiratory protection against certain organic vapours such as paint sprays, lacquers, enamels and most agricultural chemical sprays the 6000 Series Respirator is now available in a complete kit. It is not suitable for isocyanate based paints.

3M™ 6001 Organic Vapour Cartridge (A1)
For use when handling, cleaning with or using organic solvents, thinners, lacquers enamels. Also for painting, using certain organic chemicals, degreasing, glueing, mixing, compounding or printing.

3M™ 5N11 Dust/Mist Filter (P2)
Applications include spray painting, petrochemical and chemical manufacturing, and pesticide spraying. This filter can be used for solids and non-oil based particles including paint sprays (must be used with appropriate cartridges and 501 Filter Retainer).

3M™ 2071 Dust/Mist Filter (P2)
For use when you are sanding, grinding, cutting and drilling metal masonry, wood or concrete. Approved for protection against certain dusts, mists and fumes.

3M™ 2097 Organic Vapour High Efficiency Filter (GP2)
Used for welding and when working with dusts. For sanding, grinding, cutting, drilling metal, wood, masonry, concrete. When requiring relief from nuisance levels of organic vapours. For welding, brazing, soldering, metal pouring, smelting, burning lead based paints and ozone protection. Approved for protection against certain dusts, mistsand fumes.

Respirator

• Half mask dual cartridge respirator
• Low breathing resistance for comfort
• Unobstructed vision
• Replacement cartridges and filters available AS5364243

Filter Pads

• Provide additional protection when wornwith cartridges
• Prolong cartridge life

1925 Norton Dust/Mist Respirator with Valve (P1)
Shares the same features as the 1910 respirator with the addition of an exhalation valve for greater user comfort.

1955 Norton Dust/Mist Respirator with Valve (P2)
A lightweight, disposable respirator which will provide protection against thermally generated particulates such as welding fumes. Exhalation valve gives greater user comfort.

1910 Norton Dust/Mist Respirator (P1)
A lightweight disposable respirator which will provide protection against particulates such as wood dust and many more.

1501B Nuisance Dust Mask
Suitable for nuisance particulates where non-toxic contaminants are present.

3M™ 8710 Dust/Mist Respirator
For excellent balance ofperformance and cost. The 8710 is used throughout generalindustries such as foundries, steel, battery manufacturing, textiles, grain handling, paper mills and other industries where respiratory protection from dusts and mists are needed.

3M™ 8812 Dust/Mist Respirator
With a unique valve design.The 8812 enhances comfort by maintaining a cool atmospherewithin the respirator. Ideal for use in hot and humid environments such as mining, construction, sawmills, laboratories, pottery/ceramics and foodstuffs where dusts and mists are generated.

3M™ 9913 Dust/Mist Respirator
Approved for agriculturalchemicals*. Recommended for nuisance level organic vapour*.Used in foundries, undercoating, petrochemical, printing, tobacco processing, agricultural and other situations where dust/mistprotection is needed and workers are bothered by nuisance level organic vapours.*Agricultural chemicals with low vapour pressures (i.e. less than 0.01mm Hg at 25 degrees) Nuisance levels are those levels below the Worksafe Exposure Standards.

3M™9310 & 9312 Dust Respirators(P1)
The 9310 and 9312 are comfortable respirators with a 3-panel foldable design. They are lightweight and can be folded for easy storage and portability.Use against dusts found in a wide variety of industrial applications such as rubber and plastics, quarrying, engineering, pottery/chemicals, agriculture, sawmills, laboratories, construction, paint manufacture and other work situations.The 9312 has the extra comfort of the Coolflow™ exhalation valve which makes it ideal for hot or humid conditions.